Congratulations! You're now the proud owner of a new Canopy Pickup Cam. Now, it's time to unbox your system and get set up. The articles in this section will guide you through each step to install the hardware in a pickup truck, set up in the app, and begin exploring the features.
Install overview
Below is a high-level summary of the entire installation and setup process. Please follow the instructions in each step carefully. The process takes about 1 hour after removing and charging the Hub's battery.
- Install requirements and compatibility
- Unboxing the Pickup Cam system
- Step 1: Charge the battery
- Step 2: Install the camera
- Step 3: Connect the camera to the Hub
- Step 4: Power on the system
- Step 5: Install the Hub
- Step 6: Final install steps and safety check
Section 2: Set Up the System
After installing the hardware, we'll walk you through how to set up the system in the Canopy Security app. The initial setup will include downloading the most recent firmware update, which may take over 30 minutes.
Section 3: Explore the Features
In this final section, you'll learn how to make the most of your new system!
Click NEXT to move onto the next step!
| Next → |
Comments
Please sign in to leave a comment.