Articles in this section

Pickup Cam System box contents

Canopy Hub Box Contents

canopy-hub.png

Canopy Hub

The Hub is the powerhouse of your Pickup Cam system, providing cellular connectivity, data processing, and continuous power with its rechargeable battery pack.

Driving your vehicle for 30 minutes a day will charge the Hub’s battery pack. Alternatively, the battery pack may be removed and charged in your home using the provided Canopy power adapter.

obd-ii-cable.png

OBD-II Power Cable

This power cable connects the Canopy Hub to your vehicle’s OBD-II port. It draws power from your vehicle when it's moving to charge the Hub’s battery.

velcro-pads.png

Velcro Pads

The Hub has pre-installed hook-sided Velcro pads on its underside, perfect for attaching to carpeted vehicle floors. For other types of flooring, like plastic, we’ve included additional Velcro pads to ensure a more secure placement.

trim-tool.png

Multipurpose Trim Tool

The trim tool is used to tuck cables out of the way after installation.

velcro-loops.png

Velcro Loop

The velcro loop is for bundling excess cable to the Hub after installation.

power-adapter.png

Power Adapter for Removable Battery

This power adapter is used to charge the removable battery pack. This is a non-standard USB C charger, and is not designed to be use with other accessories.

battery.png

Removable Battery Pack (Pre-installed)

Pre-installed inside the Hub is a dedicated battery designed to power your security system when your vehicle is off. The battery safely recharges via the OBD-II Power Cable when the vehicle is moving.

If you drive your vehicle at least 60 minutes a day, your Hub’s battery should remain ready to power your system. However, if your driving habits vary, the battery can easily be removed and recharged at home using the provided power adapter

 

Pickup Cam Box Contents

pickup-cam.png

Pickup Cam

The Pickup Cam detects activity around your vehicle using its sensors. It then captures that activity with its camera and shares it with you in the Canopy app.

mounting-cradle.png

Temporary Mounting Cradle

The mounting cradle helps you to position the Pickup Cam on the rear truck window. It should be fitted to the window first so that the camera position can be checked before it is fitted permanently.

camera-cable.png

Camera Cable

The camera cable connects your Pickup Cam to the Canopy Hub.

cable-clips.png

Cable Management Clips

Cable management clips are used to safely secure cables around the vehicle.

glass-wipe.png

Glass Wipe

The glass wipe is used to clean the rear window before mounting the Pickup Cam,

adhesive.png

Adhesive Tape

The adhesive tape is used to permanently secure the Pickup Cam in place.

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.